TM-105-F系列熱壓鼓包機油壓機特點：
1．采用四柱三板式結構，活動板與工作面平行精度高，四個精密導套使下壓垂直精度高。
3．設備液壓組合在機架內部，結構緊湊，外形美觀大方；
4．工作臺下方裝有腳輪和腳杯，可輕便移動，省力高效；
5．另可選上下模板增加發熱裝置和進口智能溫控器，溫差可精確到±1度，上下模溫度可分開控制，操作方便；
6．另可選中間范本增加測力傳感器及顯示器，精確顯示產品受力狀況，達到所需工作目的；
7．另可選增加電子尺或光柵尺及顯示器，精確顯示油缸位移狀況，達到所需工作目的；
適用范圍：
1．各類手機或遙控器硅膠、塑料按鍵沖切，塑料制品整切分切；
2．各種手機、數碼相機、手提電腦液晶顯示屏保護膜裁切，各種不干膠、商標等的精切，切半斷等；
3．各類PV、PE、PC等薄膜開關、薄膜面板打凸鼓包、成型等；
4．各種手提電腦鍵盤軟性電路線路壓合成型等。
出力 3T 10T 15T
發熱尺寸 500*240 500*240 500*240
最大工作高度 210 210 260
油缸行程 100-150 100-150 100-150
發熱功率 4.8 4.8 4.8
Features:
1. Adopts four-column and three-plate structure, the active plate paralleling with the working surface in high precision, four precise guide sleeves leading to highly precise down-pressing plumb.
2. The cylinder being adjustable, the lower dead point positioned in high precision and the repeating precision up to 0.01mm;
3. The equipment hydraulic unit is set inside the frame, compact and elegant;
4. Under the working platform is installed with the caster and foot cup, allowing the press to move conveniently and be operated in a laborsaving and high-efficient way.
5. The upper and lower templates can be additionally adopted to add heating device and imported intelligent temperature controller; the temperature difference can be as precise as ±1℃; the upper and lower templates can be controlled separately to allow for convenient operation;
6. The middle template can be additional adopted to add force transducer and display to precisely display the force imposed on the product so as to complete the undergoing work;
7. The electronic ruler or grating ruler and display can be additionally added to precisely display the situation of the oil cylinder displacement so as to complete the undergoing work.
Scope of Application:
1. Die cutting of the silicagel and plastic buttons of vsrious handsets or remote control, whole or partial cutting of plastic products;
2. Cutting of protective film of LCD screen of various handsets, digital cameras and notebook computers, precise cutting and half cutting-off of various adhesive tapes and trademarks;
3. Raising,bulging and forming of various film switches and film plates made of PV, PE and PC,etc;
4. Pressing and forming of flexible circuits and lines of keyboards of various notebook computers.
注：聯系我時，請說是在“傲立機床網”上看到的，謝謝！
